Body of aircraft is made up of aluminum due to its good tensile strength & good conductor.This is the combined effect low pressure & speed of plane in sky.
What is ram jet?
A ramjet, sometimes referred to as a stovepipe jet, or an athodyd, is a form of jet engine with no moving parts. Ramjets cannot produce thrust at zero airspeed and thus cannot move an aircraft from a standstill.
What is a liquid metal?
Mercury. “Liquid metal” is a type of alloy, a mix of three or more metals, with end results of similar properties and characteristics to plastic that cools faster and has more than twice the strength of titanium.
What kind of work is carried out in Line Maintenance?
Are thermal protection systems of space crafts commonly composed of one panel or a collection of smaller tiles?
Does not simplification of complex honeycomb designed for thermal protection system of are usable launch vehicles jeopardize the accuracy of results?
It jeopardize the accuracy but it also has some advantages but cannot be used due to its inaccuracy.
What is the highest temperature the space shuttle under surface experiences during its mission?
Under surface of the space shuttle will experience above 2300′c at the time of re-entering.
Explain how you overcame a major obstacle?
To overcome obstacle, one should have strong determination and self confidence on himself /herself. They have to face life as it comes.
What is SPICE? Where was it developed?
SPICE is Simulation Program with Integrated Circuit Emphasis. This is analog simulator which was developed at electronics research lab of California University.
Fueling and refueling Precautions?
In hydraulic system, what stands for red and blue colors?
What are the main areas in Aviation?
Artificial intelligence
Aircrafts and parts
Advanced materials, composites and specialty metals
Computers, electronic components and systems
Fighters and attack aircraft
Government defense policies and goals
Lasers
Navigation controls and guidance systems
Ordinance and Military vehicles
Computers, electronic components and systems
Aviation electronic/Avionics
Robotics
Satellites
Search and detection equipments
Strategic defensive initiative
Sensors and instrumentation
Ships
Space vehicles and commercialization of space
What made you choose aircraft maintenance engineering/aerospace engineer line as your career?
In aircraft maintenance/aerospace engineering there are lots of interesting topics which include rocketry, aeroplanes, Lego’s. As a school student I started sketching for future aircraft and space craft,military aircraft. I analyzed the importance of space travel, aviation history, and aerospace industry and hence decided to get into this field.
Explain the day to day responsibilities of Aerospace engineering?
Each job profile even in aerospace industry differs from others. To mainly speak about aerospace there are two branches or field. One is aeronautical and other is astronautics engineering.
Explain the differences between Aeronautical Engineering and Astronautical Engineering
Aeronautical engineering deals with vehicles which operates in the atmosphere
Aeronautical engineering deals with vehicles operating in space.
Aeronautical engineering works on tunnel tests, analyzing flight test data, manned space flights, planning future space missions, spacecraft operations, designing and testing robotic systems, developing new propulsion system, computing optimum flight trajectories,developing communication systems for distance space probes and designing new rockets.
Astronautical engineer includes designing power systems for spacecraft structure, developing communications systems for distant space probes, developing hardware skills for operations in spacecraft, designing and testing robotic systems, developing new propulsion systems and computing optimum flight.
Does the knowledge of mathematics of Science is required to get into maintenance engineering?
The basic understanding of Math is important as it is not used at all the time during the course of aerospace engineering. One should have a basic understanding of mathematical definitions and knowledge on computers is very important as the computer programs will help in doing simple calculations and verify the results are reasonable.
But on the science front it is very important to have a very good understanding on various subjects like dynamics and mechanics in physics, strong emphasis on chemistry,electromagnetism. For a good engineer one should know how law of forces makes things happen.
Also if you are good at physical sciences when opposed to life sciences like biology you will be a fit candidate for aerospace engineering.
Reasons for why patch work are in round in shape?
How would you handle if your co-worker is not co-operating with you?
Talk to your co-worker directly and explain him that you are having a problem working with him and make him understand the situation, if he is not willing to listen or not co-operating, then direct the issue to chief pilot.
What would you do if your Captain is not following the instructions properly?
Refer to your plane manual and discuss the same with your client and ensure you make him understand the procedures and rules. If he does not respond, you will call your concerned aircraft officer at the airport and escalate and make sure your voice frequency is recorded.
Without Air Traffic Control, what is the minimum descent rate of the plane?
A Pilot can descend up to 500” bare minimum, without informing the ATC (Air Traffic Controller) and this is only during an exceptional cases. However, it’s always better to be in regular touch with the Air Traffic Controller and to keep him informed about the descent rate. This will not have any traffic problems during landing in the runway.
What is Hard Landing? and Emergency Landing?
How would you handle the extreme pressure during emergency situation if you know that plane is not safe and it might crash anytime?
Few professions demand you to be selfless, and our respective clients would be the most important thing, that is why customer service differs completely in such fields compared to other streams. For example, Doctors, Lawyers, Pilots…these are the professions where employee saving your customer is the up most important thing.
So, as a engineer I fully understand my duties and responsibilities and will ensure that whatever panic situation I could be in, I will continue to deliver my duties till the end and ensure passengers are safe all times. Simultaneously I will own the full responsibility of maintenance of Air Craft safe and in the airworthy condition.
How many types of emergency landings are there and explain?
There are three types of emergency landings like:
Forced landing: This is a situation where Air Craft engine fails and Pilot is forced to land the plane in the nearest airport.
Precautionary landing: This is used when Pilot faces a problem due to severe weather conditions, or being lost in the air space traffic or due to lack of fuel or expecting an engine trouble.
Ditching: This is when where Pilot cannot avoid this situation but to just land on water, which is safer than air bound.
You are a Flight Engineer? How important is to get the passengers switch off the mobile phones and laptops during land off? What could be the consequences?
It is very important to check if laptop and mobile phones are switched off or not, as the consequences can be bad….because interference of air crafts communication devices and electronic devices interfere with each other and there could be chances of not proper landing.
So, it’s highly recommended that all electronic and communication devices should be
switched off during take off and landing.
What interests and abilities would help me as an Aircraft Maintenance Engineering/Aerospace engineer?
Successful aerospace engineers need lots of curiosity, problem solving skills,organizational skills, written and oral communication skills, people skills (as in leading and participating in teams) and computer skills. There are no physical requirements; in fact, we have many engineers with disabilities and it is not an issue for their job performance
What are the fringe benefits of aircraft engineer/aerospace engineering?
Good pay, good promotion potential, travel, respect from the community at large, and you get to say that you are a man with rocket science!
What are the disadvantages of being in aerospace industry?
The biggest disadvantage is that it is a relatively small field, and the number of companies in the field is getting smaller (lots of mergers between big companies in the news lately).
 |
| Aircraft Maintenance Engineering |
How is the interview?
Some questions are not answered. May you throw light on these left questions?
Commenting is welcome
No comments:
Post a Comment